Foshan cross-beam shelf manufacturer shelf measurement standards
Foshan cross-beam shelf structure
The shelf columns depend on whether there are many bends in the cross-section and the average shelf rises more. The better the symmetrical structure.
The cross beams of the shelves depend on the hook structure of the cross beams and the way the cross beams are hung on the columns. The more hooks on the cross beams, the better. Whether the contact between the inside of the hook and the side of the column is tight and consistent, so that the structure can be stable, strong and durable.
Foshan crossbeam shelves manufacturer shelf classification
Foshan crossbeam shelves classification crossbeam shelves heavy-duty pallet shelves narrow lane pallet shelves heavy-duty storage logistics shelves
mobile cross-beam shelves pull-out shelves, etc.
Foshan crossbeam shelves manufacturer shelf usage
Foshan crossbeam shelves are low cost, safe and reliable, easy to assemble and disassemble, suitable for manual access, standard effective load of each layer
Above
Suitable for manual work It can store and retrieve boxed goods or load scattered heavy goods in conjunction with parts boxes and turnover boxes. Often used in warehousing and other fields in the logistics industry.
Foshan Cross Beam Shelf Manufacturer Shelf Introduction
Foshan Cross Beam Shelf
is the most commonly used type of shelf. The load-bearing capacity of each layer exceeds
. This is where the name comes from. It has good picking efficiency and can store heavier items but has a lower storage density. Also called pallet racks, they have the characteristics of high load-bearing capacity, adaptability to a wide range of mechanical access and selection, and high efficiency, but the space utilization rate is average. It is widely used in manufacturing third-party logistics and distribution centers and other fields. It is suitable for both multi-variety and small-volume items and small-variety and large-volume items. This type of shelves is most commonly used in high-rise and ultra-high warehouses (most of the shelves in automated three-dimensional warehouses use this type of shelf).
Advantages of Foshan beam shelves manufacturer's shelves
The fully assembled structure can be assembled and disassembled at will, which is convenient and flexible for installation and disassembly.
The columns are made of hot-rolled plates folded at multiple angles, so the shelf has a large load-bearing capacity.
The column is a prefabricated structure. The beams and columns are connected with steel buckles and locked with a safety key to prevent them from falling off.
The column is equipped with each
Adjustable hole spacing can be adjusted arbitrarily according to the height of the goods.
Suitable for high-height storage of materials. It can make full use of the space in the warehouse to achieve material classification management. It can be used with forklifts or stackers.
Foshan crossbeam shelves manufacturer shelf structure
Foshan crossbeam shelves are assembled from upright columns, crossbeams, cross braces, diagonal braces and self-locking bolts, which can effectively prevent shelf instability caused by loose bolts. The crossbeams are made of specially made cold-rolled materials
type closed beam, the structure is simple, reliable, light in weight, strong in bearing capacity and low in cost. When the column clamp is connected to the column, it is equipped with a specially designed safety pin to ensure that the cross beam will not fall off under external impact. The laminate adopts internationally made strips. The laminate has the characteristics of strong bearing capacity, wear resistance, simple replacement and low maintenance cost.
The main features of Foshan crossbeam shelves manufacturer's shelves
It is one of the most common and widely used shelves and is suitable for use in most warehouses or product goods.
Usually, goods are assembled on unit containers such as pallet storage cages and then stored on shelves for storage. The load capacity of each unit is generally within
There are usually two units placed on each floor.
It has the feature of optional picking of goods
. Handling machinery such as forklifts can reach any cargo location for storage operations. Storage operations are convenient and fast!
The span of unit shelves is generally within
and the depth is within
The height of low- and high-position warehouse shelves is generally within
and the height of super-high warehouse shelves is generally within
(this type of warehouse is basically The total height of the automated warehouse shelves is composed of several vertical columns
).
The height of each layer can be freely adjusted as an integer multiple of
.
Use mechanical handling equipment for storage operations.
Heavy-duty (beam-type) shelves are generally made of cold-rolled special-shaped steel. The columns are made of
(
)
(
)
The surface of the steel is punched with diamond-shaped holes. The cross beam is made up of welded beams connected to pendants. Generally, pallets are used instead of laminates to facilitate forklift transportation. Layer load
Ton to
Design surface electrostatic spraying, waterproof, anti-rust and anti-corrosion, stronger safety factor, high safety factor, plug-in combination does not require screws and welding, very convenient assembly, fully utilizes the space area, provides storage capacity .
Foshan beam shelf manufacturer shelf specifications and accessories
Foshan beam shelf column specifications include
**
**
and
**
Three specifications.
Foshan beam shelf beam specifications include
** ** ** ** **
welded beams and
**
shaped beams.
Foshan cross beam shelf small span beam specifications include
***
Rectangular
*
** ** **
.
The specifications of the beam shelf laminate include
The steel plate is bent and reinforced at the bottom.
The separator is actually also called a shelf tie rod or a shelf connecting rod. It is one of the conventional standard accessories in cross-beam shelves and is also an important consideration in shelf design. This accessory is very important for the shelf. It can greatly enhance the strength, safety and overall stability of the shelf.
The column piece is generally composed of two columns
several horizontal pulls
several cable pulls and then connected by cross beams. Crossbeam shelves are generally operated with forklifts, which will inevitably hit the columns of the crossbeam shelf. At this time, the column protector plays a role in preventing the crossbeam shelf from being damaged by greater impact.
Foshan beam shelf manufacturer shelf installation method
First, install the horizontal braces (cross braces) and diagonal braces (diagonal braces) on the columns with screws. Put the two assembled column pieces (one column piece
two columns
several horizontal pulls
several diagonal pulls) on the ground and adjust the distance between the two column pieces to the length of the beam. Just install the crossbar.
When installing the sub-frame, first install the column pieces, then adjust the distance between the installed column piece and the side column piece of the main frame to the length of the cross beam, and then install the cross beam.
Number of horizontal braces and cable stays
Column length
~
One cable brace and two horizontal braces
Column length
~
Two inclined braces Two or three horizontal pulls
Column length
Three inclined pulls, two or three horizontal pulls
Column length
~
Four inclined pulls Two or three horizontal pulls
Column length
~
Five cable pulls, two or three horizontal pulls
The number of horizontal pulls and cable pulls is as shown below. Generally speaking, the calculation method is: for each cable pull, there is one cable pull above and one below. It is appropriate to add one more horizontal pull on top.
Foshan beam rack manufacturer shelf product extensions
A heavy-duty double-deep rack
Double-deep racks are an extension of heavy-duty beam racks and are named after different handling forklifts.
The picking rate of goods is first in, last out
The difficulty of picking up goods is moderate and it is applicable to a wide range of applications.
Second-duty narrow alley-type shelves
Narrow alley-type shelves have the characteristics of high load-bearing height, adaptability to a wide range of selection, and high efficiency. The space utilization rate is about 10% higher than that of the cross-beam type
.
The variety of items that can be stored is rich, and with the help of trays and various accessories, it can solve the access problems of most materials.
Forklift access is only needed
or so.
Access machinery narrow alley type special forklift.
The space utilization rate is about
.
All storage locations are independently accessible first-in-first-out.
Suitable for warehouses with higher factory buildings up to
meters.
The requirements for ground flatness are relatively high.
High operating efficiency, fast walking and lifting can be carried out at the same time.
Extremely high picking efficiency.
Coupled with unlimited radio frequency, high management accuracy can be achieved.
Foshan cross-beam shelves manufacturer's shelf precautions
When using cross-beam shelves, we must prevent them from being top-heavy and should adhere to the principle of placing light goods on the top and heavy goods on the bottom.
To prevent overloading, the weight of each layer should not exceed the maximum load capacity of the shelf.
Anti-collision forklifts should be handled as gently as possible during operation to prevent collisions with the shelves.
Operators should not enter the bottom of the shelf directly when there are goods above the shelf.
To prevent the use of non-standard floor boards (pallets), pallets, etc., it is most suitable to use Sichuan bottoms on shelves.
When the shelf height exceeds eight meters, corresponding loading and unloading machinery is required. Therefore, the total amount of channel area required is larger and the storage density is smaller than other systems. Heavy-duty warehouse racks can realize rapid access to various pallets and the maximum unit cargo compartment can be adapted to various types of pallets and racks. The height of the beam can be adjusted according to the size of the cargo. The circulation of goods is large and convenient and rapid. Cross beam shelves are the lowest cost and can be quickly installed and folded.
Foshan beam shelf manufacturer consultation hotline
Foshan beam shelves manufacturer